Three things that immediately improve the speed of your Wi-Fi network

There are several situations that are responsible for a very fast or slow wireless network. The good news is that some of them are very simple to solve. That said, we’re going to show you the three things that don’t cost money and immediately improve the speed of your Wi-Fi network.

Three things that immediately improve the speed of your Wi-Fi network

1. Router on the floor or too low

Do not place the router on the floor. You should move it away from the ground to a height of at least one and a half meters if possible. See things like a light bulb. When we turn it on we want it to shine as brightly as possible, and not just illuminate the floor. This is a basic principle. The higher the router, the better it will be. This is because you will have less interference and obstacles to overcome.

But it’s not just the height that’s important. If possible, place your router in the center of your home. Routers send wireless signals in all directions, so strategically placing your router in a central location will help maintain your connection within the confines of your home. Furthermore, we may even be able to have a better signal in certain rooms.

Some people, even if they have the possibility to place the router in a more central part of the house because they have the necessary connections, they prefer to place it in a corner of the room or in a place where it looks better aesthetically but closer to the wall that gives access to the neighbor’s house. This is a mistake. Not only are we trying to get other people to access our Internet, but we end up having connection failures in certain parts of the house. So avoid doing this as it may harm your Wi-Fi network.

2. Place the Wi-Fi router next to the TV

There are many people who place their operator’s router close to the TV for obvious reasons. Most have a Smart TV with access to many streaming services and we assume that the closer you are to the router the better it will be. Furthermore, in many cases, this is where installers place it. However this is actually a mistake.

Although the principle regarding TV is correct, that is, the closer to the router the better speed, there is a problem and it is in fact not a good idea to do this.

Wi-Fi uses radio waves to transmit the signal Internet around our house. Now these radio waves are subject to a lot of interference. Especially on the part of electronic devices including TVs.

Another reason why we shouldn’t place the router near the TV is because it can obstruct the Wi-Fi signal. It’s true that signals can pass through the TV. But all the metal inside will degrade the signal strength. If you have no other choice, as the installation of your house does not allow it to be placed elsewhere, then the ideal would be to place it at around 180 cm.

3. Do not restart the router

Most newer routers do not need to be restarted regularly. But, as most people know, sometimes it can be important to restore our connection and get better speed. However, in this field, those who have some more advanced equipment or firmware like DD-WRT have an advantage. They can schedule restarts for certain times. For example, you can program the router to restart when you are sleeping, for example at four or five in the morning

However, if you find yourself regularly rebooting your router, the DD-WRT and Tomato firmware options have timed reboot options. Unplug it once a day while you sleep, and you’ll never notice the downtime as the router shuts down and restarts.

Check if this isn’t slowing down your internet speed

In some Leak articles, especially those related to light saving, We’ve already talked about something called Energy Vampires. In practice, they are devices that suck a lot of electrical energy and we don’t even realize it. In fact, we only realize it when we see the electricity bill. In the case of the Internet, there are also what we can call Broadband Vampires.

Discovering the vampires that drain our network speed is not always an easy task. However, it is also not impossible. The router can help us find out.

Of course, not everyone will show the equipment that is connected. But most do. After identifying everything that is connected to your network and understanding which category they belong to, let’s look at what each one can spend.

Streaming Devices

The devices of streaming can take up a lot of network speed. Especially if you are watching 4K content. Imagine that you are in the bedroom watching a streaming service and your child is in the living room watching YouTube, which is what normally happens at home. Now this is more than enough to slow down the network.

What some people do to avoid this problem is to lower the viewing quality. However, if you are not using your computer for downloads at the same time and you really need the speed, you should not do it. After all, we all want to make the most of the TV’s resolution.

security cameras

Many people have security cameras at home, whether from the Google Nest or any other, they don’t realize what they can spend. But the truth is that they really use a lot of traffic. Especially because several models use the cloud to store recordings.

The new Nest cameras, for example, can use between 100 and 400 GB per month per camera. So it is not surprising that they slow down network speed.

Windows Updates

O Windows, By default, it uses a peer-to-peer system to optimize updates. In other words, Windows computers connect to each other for a single purpose, to quickly share Windows update data over the Internet.

People who want to keep all their bandwidth may want to disable this form of sharing. In fact, there are people who disable automatic Windows updates for this purpose.

Automatic game updates

Even if you don’t play some titles that are installed, don’t forget that they can receive updates automatically, especially if they receive them through a service. The point is that they can be really big and in many cases we don’t even realize we are downloading them.

Just to get an idea of ​​how many updates to the Call of Duty, often weigh between 10-30GB. One last year even weighed 40GB.

To prevent this from happening, you can disable automatic updates and start doing everything manually. All for the health of your Wi-Fi network.