Nobody likes a computer with risks. They greatly devalue a machine and give it an ugly and even neglected appearance. The problem is that it’s not very difficult for them to appear. We just need to carry the laptop in our hand and when we least expect it we will scrape it somewhere. Or we have cats that like to use it, sometimes, as a skating rink. Whatever the reason, the good news is that it is possible to remove or disguise risks from a computer. As long as, of course, they are not deep. So we will tell you how you can remove scratches from screens and other equipment.
How to remove scratches from screens and other equipment! look here
So let’s look at the best solutions to remove scratches from screens and beyond. Some work better than others.
Toothpaste
Toothpaste is an effective scratch remover because it contains small abrasive particles that can “sand away” superficial scratches. It will smooth the surface of your laptop and reduce the appearance of scratches. However, if the body of your laptop has a matte finish, it can cause the area where you applied the toothpaste to start shining. So be careful.
![](https://cdn.shortpixel.ai/spai/q_lossy+ret_img+to_auto/www.leak.pt/wp-content/uploads/2023/04/riscos-rotated.jpg)
You can use toothpaste on the plastic or metal cover of a laptop. But follow these steps.
First, clean your laptop with a soft, lint-free cloth to remove dust.
Try the toothpaste on a small, inconspicuous part of your laptop because it may not be good for some coatings.
If you see that everything went well then apply small pea-shaped clumps of toothpaste to the target area.
![](https://cdn.shortpixel.ai/spai/q_lossy+ret_img+to_auto/www.leak.pt/wp-content/uploads/2023/04/fotos5.jpg)
Then use a soft, damp cloth to rub the toothpaste into the scratch using gentle circular movements.
Rub until the scratch disappears. Remember to be gentle because too much pressure can cause more damage.
Use a clean, damp cloth to wipe off the toothpaste.
Please note that you must do this on the body of the computer and not on the screen. In the case of panels, abrasive particles can cause more scratches.
Baking soda and lemon juice
Like toothpaste, baking soda is another abrasive that can be great for covering up scratches. In fact, if you mix it with water in equal parts, it can be an excellent way to even remove stains. Lemon juice has acidic properties that can be useful for dissolving certain types of surface imperfections.
![remove scratches from the screen](https://cdn.shortpixel.ai/spai/q_lossy+ret_img+to_auto/www.leak.pt/wp-content/uploads/2023/04/bica.jpg)
However, the acid is generally not suitable for metal due to corrosion. In the case of metal, you can add water to lemon juice and baking soda in a 1:1:1 ratio. Mix the three until it forms a fine paste.
Follow these steps after making your folder.
The method is the same as using toothpaste. However, you must let it rest for five minutes before removing it. This is the only difference.
There is also a good method for the screen
In the CD days, petroleum jelly was a popular way to clean records and fill in scratches to make CDs more readable. Nowadays, we can apply the same method to hide scratches on your laptop screen.
Follow the steps below:
Turn off your laptop, and make sure the screen is cool. Clean your screen with a microfiber cloth and a 50/50 mixture of isopropyl alcohol and distilled water. This method is one of the best cleaning tricks for your laptop.
![](https://cdn.shortpixel.ai/spai/q_lossy+ret_img+to_auto/www.leak.pt/wp-content/uploads/2021/11/limpar-ecra-1-e1637755936167.jpg)
Then use a cotton swab to apply Vaseline to the scratched area. Rub it with a microfiber cloth until the petroleum jelly fills the scratch. Use the microfiber cloth to remove excess around the scratch.
Vaseline will help make the scratch less noticeable. However, you may need to do it again if the Vaseline wears off over time. Since it is sticky, it can also attract dirt and dust. You should only do this if you want a temporary fix.